Lvquan Rotary Heat Storage High Temperature Incineration Equipment, produced by a trusted Chinese manufacturer and supplier, offers competitive prices and exceptional quality, making it an ideal choice for efficient and sustainable waste incineration.
Lvquan Rotary Heat Storage High Temperature Incineration Equipment, a product of China's reputable manufacturer and supplier, offers competitive prices while maintaining uncompromising quality. This incineration equipment, with its rotary heat storage design, efficiently incinerates waste at high temperatures, ensuring complete destruction of harmful substances. The manufacturer's commitment to excellence in both design and manufacturing processes ensures the equipment's durability and reliability. The Lvquan Rotary Heat Storage High Temperature Incineration Equipment is an excellent choice for facilities seeking an environmentally friendly and cost-effective solution for waste disposal.
Our company offers two types of Rotary Heat Storage High Temperature Incineration Equipment,which are the rotary RTO and the single barrel multi-valve RTO.
The rotary RTO,also known as a rotary energy storage oxidation furnace, oxidizes combustible waste gas into corresponding oxides and water under high temperature, purifying the exhaust gas and recovering the heat released during the decomposition of exhaust gas. The decomposition efficiency of exhaust gas is over 95%to 99%, and the heat recovery efficiency is over 95%.
| Application Industries |
Petrochemital, printing coating/gluing coating dlying, wire enameing pharmaceuticals, and chemicals,etc. |
| Concentration Range | 500~5000mg/m³(2~12%LEL). |
The Rotary Heat Storage High Temperature Incineration Equipment mainly consists of a combustion chamber,ceramic packing bed, and rotary valves, etc.The furnace body is divided into 12 ceramic packing beds, 5 inlet chambers (preheating zone), 5 outlet chambers (cooling zone), 1 purge chamber, and 1 isolation chamber.
The waste gas enters the preheating zone through the intake distributor,and after being preheated to a certain temperature, Rotary Heat Storage High Temperature Incineration Equipment enters the top combustion chamber for complete oxidation and decomposition. The purified high-temperature gas leaves the combustion chamber, enters the cooling zone to transfer heat to the ceramic energy storage material, and the gas is cooled and discharged through the gas dis-tributor. The ceramic energy storage material in the cooling zone absorbs heat and stores large amounts of energy for heating the waste gas in the next cycle. In this way, the waste gas is alternately oxidized and decomposed in the combustion chamber. When the VOC concen-tration in the exhaust gas is above a certain value, and the heat released from the oxidative decomposition is sufficient to maintain the reaction temperature of the combustion chamber,there is no need to use fuel to heat it, thus maximizing the utilization of energy cycling.
The single barrel multi-valve Rotary Heat Storage High Temperature Incineration Equipment consists ofa gas main pipeline,switching valve,distribution chamber,energy storage layer,and combustion chamber.The distribution chamber and energy storage layer are divided into seven sectors, which rotate and alternate as the intake sector, purge sector,and exhaust sector.Each sector is independently equipped with an intake valve, exhaust valve, and purge valve, and the functions of each sector are switched through opening and closing these valves.
| Three-room RTO | Rotary RTO |
Single cylinder multi-butterfly valve RTO |
|
|
Mo.of heat storag chambers |
3 | 12 | 7 |
| No.of valves | 9 | 1 | 21 |
| Valve form |
、 Push cylinder valve,butterfly valve |
Rotary valve | Hard seal butterfly valve |
| Purification rate | 99% | 98% | 99% |
|
Pipeline pressure fluctuatior |
±250Pa | ±50Pa | ±50Pa |
| Area occupied | Large footprint | Small footprint | Small footprint |
|
Amount of heat accumulator |
m o r e | less | less |
| Thermal efficiency | 950% | 95% | 95% |
| Valve failure rate | High | Low | Low |
| Valve |
Universal valves can be changed quickly |
Specialized valve,need professional factory maintenance |
Well-known valve brands |
1.It is necessary to specifically indicate during selection if the exhaust gas contains corrosive components such as sulfur and chlorine,and SUS2205 or higher corosion-resistant materials need to be used for such gases.The material processing and manufacturing must also include special treatment for these gases in the latter stage.
2.The mixed waste gas entering the heat storage type high-temperature incineration equipment should have a concentration range of less than 1/4 of the lower explosive limit (LEL).
3.The maximum temperature used for heat storage type high-temperature incinerators is ≤960°℃.High heat substances and highly concentrated gases need to undergo dilution treatment,and if there are special requirements,they should be specified to ensure spe- cific insulation requirements during design.
4.The gas entering the heat storage type high-temperature incineration equipment must not contain dust particles or oil mist that could cause clogging or bowing/reheating,to prevent reheating and blockage of the heat storage ceramic.
5.For some regions with requirements on nitrogen oxides emissions from high-temperature incineration equipment outlets, Rotary Heat Storage High Temperature Incineration Equipment needs to be specifically indicated,so that low nitrogen combustion systems can be selected when purchasing combustion engines.Addition- ally, even if low nitrogen combustion systems are used, if the waste gas contains a high concentration of nitrogen components that fail to meet the emissions standards,subsequent denitrification treatment is required.
